This is an open box machine.  It has been on display in one of our branch locations and may have some cosmetic blemishes to the case.

Spectrum 375

X-TREME with XT30 Torch

30 Amps for 3/8 in. mild steel capacity, XT30 torch with ergonomic handle and flexible cable, Auto-Line and MVP Plugs make this 19 lb unit the most portable plasma cutting system in the market!

Rated Cutting Capacity

The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.

Auto-Line and MVP (multi-voltage plug)

Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120 240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Millers multi-voltage plug (MVP) allows connection to 120 or 240 V receptacles without tools choose the plug that fits the receptacle and connect it to the power cord.

Automatic Air Regulation

The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance.

Protective X-CASE

Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plugs, consumable box, as well as gloves, eye protection, etc.

XT30 Torch

Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy.

Auto-Refire Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal all automatically! No need for manual re-triggering which reduces user hand fatigue.

Portability

Portable in the shop or at the job site at 19 lb the shoulder strap allows the end user to easily move from location to location.

Wind Tunnel Technology and Fan-On-Demand

Wind Tunnel Technology - internal air flow that protects electrical components and PC boards from dirt, dust, debris greatly improving reliability. Fan-On-Demand cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit.

Industrial Applications

•Maintenance

•Light Construction

•Prototyping

•Body Shops

•Fabrication

•HVAC Ductwork

Process: Air Plasma Cutting

Rated Output: 30 A at 92 VDC, 35% Duty Cycle

Cutting Capability: Rated: 3/8 in. (9.5 mm) Sever: 5/8 in. (15.9 mm)

Weight: With torch: 19 lb. (8.6 kg)

Required Input Pressure/Flow: 5.0 SCFM (146 L/min.) at 90 PSI minimum (621 kPa) 120 PSI maximum (828 kPa)

Comes Complete With:

•XT30 hand-held torch with 12-ft. (3.7 m) cable

•Heavy-duty work clamp with 12-ft. (3.7 m) cable

•X-CASE provides protection in transport and storage

•10-ft. (3 m) MVP power cord

•MVP plugs 5-15P (120 V, 15 A), 6-50P (240 V, 50 A)

•Shoulder strap

•Consumables box with 2 electrodes, 2 tips, deflector, and air fitting

 *Shipping is FREE to 48 states.  Please request a quote for other locations.*

WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.